Kohler K301 Bedienungsanleitung PDF herunterladen (Seite 14)

Storage

If the engine will be out of service for two months or

more, use the following storage procedure:

1 .

2 .

Clean the exterior surfaces of the engine.

Change the oil and filter while the engine is still

warm from operation. See “Change Oil” on

page 8.

. Change oil in reduction gear unit, if so equipped.

Refill with the same oil as used in engine

crankcase for season of operation. See page 8.

4 . The fuel system must be completely emptied, or

the gasoline must be treated with a stabilizer to

prevent deterioration. If you choose to use a

stabilizer, follow the manufacturers

recommendations, and add the correct amount

for the capacity of the fuel system. Fill the fuel

tank with clean, fresh gasoline. Run the engine

for 2-3 minutes to get stabilized fuel into the

carburetor.

To empty the system, run the engine until the fuel

tank and system are empty.

Remove the spark plug. Add one tablespoon of

engine oil into the spark plug hole. Install the

plug, but do not connect the plug lead. Crank the

engine two or three revolutions.

6 Remove the spark plug. Cover the spark plug

hole with your thumb, and turn the engine over

until the piston is at the top of its stroke.

(Pressure against thumb is greatest.) Reinstall

the plug, but do not connect the plug lead.

Store the engine in a clean, dry place.

Parts Ordering

The engine Specification, Model, and Serial Numbers

are required when ordering replacement parts from

your Kohler Engine Service Dealer. These numbers

are found on the identification plate which is affixed to

the engine shrouding. Include letter suffixes if there

are any. See “Engine Identification Numbers” on

page 5.

Always insist on genuine Kohler parts. All genuine

Kohler parts meet strict standards for fit, reliability,

and performance.

Major Repair

Major repair information is available in Kohler Engine

Service Manuals. However, major repair generally

requires the attention of a trained mechanic and the

use of special tools and equipment. Your Kohler

Engine Service Dealer has the facilities, training, and

genuine Kohler replacement parts necessary to

perform this service. For Sales & Service assistance

call I-800-544-2444 (U.S. & Canada) or contact your

Kohler Engine Dealer or Service Distributor, they’re in

the Yellow Pages under Engines-Gasoline.

Model Designation

The model number designates the cubic inch

displacement and the number of cylinders - Model

K241A, for example designates 24 cubic inch

displacement, 1 designates single cylinder. The letter

suffix designates a specific version as follows:

Suffix

Designates

Oil Pan Type

Generator Set

Pump Model

Quiet Model

Gear Reduction

Electric Start

Retractable Start

1 2 ... 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Kohler K301 Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Kohler K301