Kohler CFI230G Bedienungsanleitung PDF herunterladen (Seite 12)

Support the weight of the column. Connect

the water pipe to the connector from

at the top of the column.

Caution

Support the weight of the column. Plug the

electrical cable into the connector on the cable

from the Water Delivery System

Caution

CFI230G

Check the lintel is level.

If adjustment is required turn screw ‘A’

on the panel clamps to lift or lower the rail.

Note: If the lintel cannot be made level by

adjusting the clamps remove the grub screws

and fit the longer ones supplied in the parts pack.

When the lintel is level tighten screw ‘B’ on

each panel clamp until it grips the glass.

IMPORTANT - DO NOT OVER TIGHTEN

Fit caps to lintel ‘C’

Remove the lintel from glass and remove the parking block

1. Match parking block

to mark on wall

5. Screw parking block to wall

3. Drill holes with 6mm drill

4. Plug holes

6. Re-fit lintel to glass

and push wall mount

on to the parking block

7. Secure the lintel to

parking block by

tightening allen

screw ‘A’

2. Spot drill hole positions

STEP

Carefully lift the Water

Delivery System column

and place the bottom

into the jamb assembly

Be very careful not

to scratch or damage

the tray

Fixed Head Water Delivery Only

STEP

CFI230G

STEP

Push top of column

into jamb assembly

until it locks in place

1 2 ... 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Kohler CFI230G Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern