Kohler K-12162-CP Installationsanleitung PDF herunterladen (Seite 4)

2. Prepare the Site — Wall Plate(s)

Determine the desired mounting location.

Mark the vertical and horizontal center lines for the accessory to

be installed. Consult the roughing-in diagrams to determine the

dimensions.

When installing multiple-post accessories, measure the accessories

so you can provide the required distance between the center

points.

Use a level to ensure that all center points are level.

3. Mark and Drill the Pilot Holes

Mark the pilot hole locations vertically 9/16” (1.4 cm) above and

below the center point or center points.

Vertically align the holes on each wall plate.

If the installation requires multiple posts, conﬁrm that the center

points are even using a level.

NOTE: There is no provision for later adjustment if the center points

and resulting pilot holes for multiple post accessories are not level.

Select a drill and 5/16” drill bit that are appropriate for the wall

material you will be drilling through.

Carefully drill a 5/16” hole at all marked pilot hole locations.

1013264-2-C 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 35 36

Keine Kommentare

Kohler K-12162-CP Installationsanleitung Seite 4