Kohler K-15251-4-CP Installationsanleitung PDF herunterladen (Seite 3)

1. Faucet Installation

NOTE: If your faucet does not have preassembled handles, the cold

valve stem is marked for identiﬁcation. Left is hot, right is cold.

Place the undercover on the bottom of the faucet base.

Apply a bead of plumbers putty or other sealant to the underside

of the undercover according to the putty or sealant

manufacturer’s instructions.

Center and align the faucet on the sink.

Securely hand tighten the nuts from underneath the sink.

Remove any excess putty or sealant.

2. Install the Handspray (optional)

Apply a bead of plumbers putty or other sealant to the underside

of the spray holder according to the putty or sealant

manufacturer’s instructions.

Insert the spray holder through the sink hole.

Hand tighten the nut to the spray holder from under the sink.

Remove any excess putty or sealant.

Insert the handspray hose through the spray holder.

Attach the hose to the faucet base using thread sealant.

Valve

Stem

Apply

plumbers

putty.

Undercover

Nut

Inlet

Apply sealant

tape.

Apply

plumbers

putty.

Hose

Nut

Spray Holder

Kohler Co. 3 1010457-2-B

1 2 3 4 5 6 7 8 ... 15 16

Keine Kommentare

Kohler K-15251-4-CP Installationsanleitung Seite 3