Kohler K-19047-0 Installationsanleitung PDF herunterladen (Seite 3)

1. Preparation

Position the template on the countertop.

For Wall-Mount Faucets: Provide sufficient spout overhang into

the lavatory basin. The faucet spout length must be at least 5″

(12.7 cm) to provide proper performance.

For Countertop Faucets: Pay special attention to the spout and

handle ﬁt clearance when locating the faucet. Use the template to

locate the faucet spout hole centerline on the countertop. This

centerline is recommended to provide adequate clearance

between the edge of the lavatory and the spout.

Check for adequate clearance between the backsplash, faucet

spout and handles, and lavatory. Kohler Co. recommends a

clearance of at least 1″ (2.5 cm).

Refer to the faucet installation instructions for required clearance,

and mark the preferred faucet hole locations using a soft lead

pencil.

Trace the template on the countertop.

Cut-out

Line

Outside

Edge of

Lavatory

Countertop

Backsplash

Template

Kohler Co. 3 1052863-2-B

1 2 3 4 5 6 7 8 ... 15 16

Keine Kommentare

Kohler K-19047-0 Installationsanleitung Seite 3