Kohler K-2804-30 Installationsanleitung PDF herunterladen (Seite 5)

2. Install the Lavatory

Self-Rimming Installations

Cut out the opening by carefully following the pencil line traced

from the template.

CAUTION: Risk of personal injury or product damage. Cast

iron lavatories are very heavy. Get help lifting the lavatory into

place.

Temporarily position the lavatory in the countertop cutout so the

“Kohler” logo is to the back. Adjust to ﬁt.

Remove the lavatory.

Drill the faucet holes.

Install the faucet and drain according to the manufacturer’s

instructions.

Clean the countertop, and carefully position the lavatory in the

countertop opening so the “Kohler” logo is to the back.

Apply a thin, continuous bead of sealant around the lavatory

edges.

Immediately wipe away any excess sealant, and ﬁll any voids as

needed.

Verify that the lavatory has not moved out of position.

Allow the sealant to cure at least 30 minutes before proceeding.

Countertop

Backsplash

Countertop

Backsplash

Locator Line

Faucet

Centerline

2" (5cm)

Min.

Cut-Out

Template

1/4"

(6mm)

Min.

2" (5cm)

Min.

1" (2.5cm)

Minimum

Clearance

Outside

Edge of

Lavatory

Spout

Centerline

Cut-out

Line

Kohler Co. 5 1018375-2-A

1 2 3 4 5 6 7 8 9 10 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Kohler K-2804-30 Installationsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Kohler K-2804-30